Air4 Universal Receiver
ADVANCED FUNCTIONS AND TROUBLE SHOOTING
How to insert the button of an Air4 V remote control back into the Universal Receiver.
This procedure is necessary if:
-
The used Air4 V remote control has been lost / broken
- The button associated with the Air4 Universal Receiver was mistakenly overwritten with another
remote control
Procedure:
• Press button 'P' on the Air4 Universal Receiver for a few seconds until LED 1/2 flashes; release button
'P'.
Note: With LED L1 on (relay 1 output) press button 'P' to select LED L2 (relay 2 output).
Press the free button on the AIR4 V remote control (with software version equal to or above 1.6) until
LEDs 'L1' and 'L2' illuminate with a fixed light.
• Release the remote control button.
• When LEDS 'L1' and 'L2' go out, the AIR4 V button has been memorised on the receiver.
How to make other copies of a remote control
To make a copy of the Air4 Universal Receiver code (e.g. button 1) on other remote controls, use a Silca
AIR4 V remote control (with software version equal to or above 1.6) and follow Silca's standard copying
instructions.
Copyright Silca S.p.A 2020. All right reserved
E n g l i s h
6