Kit Assembly; Iso Din Head Unit Provision With Pocket - Metra 99-3108 Manual De Instrucciones

ISO DIN head unit provision with pocket

1. Slide the radio housing brackets onto
the sides of the radio housing.
(Figure A)
2. Mount the pocket to the brackets with
the supplied (4) screws. (Figure B)
3. Mount the radio to the brackets with the
screws supplied with the unit.
(Figure B)
4. Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
5. Reassemble dash in reverse order
of disassembly.

Kit Assembly 99-3108

6
(Figure A)
(Figure B)