3.
Loosen the four screws attached in the right panel of the burner box 3 to 4 turns as shown. Hang the right side
shelf by the slotted holes in its side onto the four loosened screws. Tighten the four previously loosened screws.
Loosen
4.
Open the grill lid, cut the zip tie which holding the drip tray and the main burner.
Slide the drip cup into the drip cup support between the beam.
Line the drip cup with a layer of aluminum foil to make it easier to clean.
Adjust the drip tray, until it is in the middle bottom of the fire box and hold in place.
It is an easy clean tray, it can be slide out from the front for cleaning.
Warning: Please make sure the drip tray and drip cup are properly installed before turning burners on.
Drip cup
Drip tray
Loosen
Drip cup
17
Drip tray