Registering Magic Remote; Open Source Software Notice Information - LG 43UH610T Guía Rápida De Configuración

C
(up/down/left/right)
left or right button to scroll the menu. If you press
buttons while the pointer is in use, the
pointer will disappear from the screen and Magic
Remote will operate like a general remote control.
To display the pointer on the screen again, shake
Magic Remote to the left and right.
Wheel (OK) Press the center of the Wheel
button to select a menu. You can change channels
by using the Wheel button.
Returns to the previous screen.
* Clears all on-screen displays and returns to
TV viewing.
Displays the program event according to
time scheduler.
Used for viewing 3D video. (For 3D models)
(INPUT) Changes the input source.
• Pressing and holding the
displays all the lists of external inputs.
(Q. Settings) Accesses the quick settings.
• Pressing and holding the
displays the All Settings menu.
Color buttons These access special functions in
some menus.
( Red, Green,
, Control buttons for media contents.
You can zoom in on the area where the
remote control is pointed.
* By zooming in on the selected area,
you can view it in full screen.
* : To use the button, press and hold for more than
3 seconds.

Registering Magic Remote

How to Register the Magic Remote
To use the Magic Remote, first pair it with your TV.
1 Put batteries into the Magic Remote and turn the
TV on.
2 Point the Magic Remote at your TV and press the
Wheel (OK) on the remote control.
• If the TV fails to register the Magic Remote, try
again after turning the TV off and back on.
14
Press the up, down,
(INPUT) button
(Q. Settings) button
Yellow, Blue)
How to Deregister the Magic Remote
Press the and
at the same time, for five seconds, to unpair the
Magic Remote with your TV.
• Pressing and holding the
let you cancel and re-register Magic Remote at
once.
Licenses
Supported licenses may differ by model.
For more information about licenses, visit
lg.com.
Open Source Software Notice
Information
To obtain the source code under GPL, LGPL, MPL,
and other open source licenses, that is contained
in this product, please visit
com.
In addition to the source code, all referred license
terms, warranty disclaimers and copyright notices
are available for download.
LG Electronics will also provide open source code
to you on CD-ROM for a charge covering the cost
of performing such distribution (such as the cost of
media, shipping, and handling) upon email request
opensource@lge.com
to . This offer is valid for three
(3) years from the date on which you purchased
the product.
Troubleshooting
• Cannot control the TV with the remote control.
- Check if anything such as tape has been placed
over the receiver.
- Check if there is any obstacle between the
product and the remote control.
- Replace the batteries with new ones.
• No image display and no sound is produced.
- Check if the product is turned on.
- Check if the power cord is connected to a wall
outlet.
- Check if there is a problem in the wall outlet by
connecting other products.
(Home) buttons
button will
www.
http://opensource.lge.