Before Each Use; Use Mode; Use Istructions Models Hydraulic Bi100-Bi180 (Hydraulic/Pneumatic) - Moretti MOPEDIA NEFTI BI100 Manual Del Usuario

6
A. Washing towel
B. 180° foldable side rail
C. Motor unit remote control (only for BI110-BI200)
D. Control unit with battery (only for BI110-BI200)
E. Lifting motor unit of bathing plan(hydraulic BI100-BI180, electric BI110)
F. Tilt motor unit of bathing plan(gas spring BI100-BI180, electric BI110)
G. Wheels with directional/total lock
H. Drainage pipe
I. Head/foot side locked rail
A. Column actuators for elevation and inclination of the bathing plan (BI200)

8. BEFORE EACH USE

• Before patient washing or transferring, verify that the wheels are braked and the sides
are lifted;
• During the transfer, avoid passing trough obstacles that could cause an overturning.
WARNING!
• Verify the good condition of the washing towel and the drainage pipe, the damages
caused by the wear can produce water leaks during the washing

9. USE MODE

9.1 Use istructions models hydraulic BI100-BI180 (hydraulic/pneumatic)

- To raise the plan of the trolley lifting, press
many times the raiser pedal like in the fig X
(rif A), to lower the bed press totally the raiser
pedal (rif B)
- To calibrate the grade of the washing plan,
unblock the gas spring using the lever at the
center of washing plan and execute the grade
(do this operation without the load on the
trolley)
Fig. 3