Declaration Of Electromagnetic Compatibility - Moretti MOPEDIA NEFTI BI100 Manual Del Usuario

13. DECLARATION OF ELECTROMAGNETIC COMPATIBILITY

The NEFTI shower trolley device is designed for use in the electromagnetic conditions
specified in the following tables. The NEFTI device user must be sure that these conditions,
during the usage, are real.
Table 1
Manufacturer's guide and declaration - electromagnetic emissions
The NEFTI device is intended to be used in the following electromagnetic conditions.
The client or user must ensure that it is used in these conditions.
Emission tests
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuation/flicker emissions
IEC 61000-3-3
Table 2
Manufacturer's guide and declaration - electromagnetic emissions
The NEFTI device is intended to be used in the following electromagnetic conditions.
The client or user must ensure that it is used in these conditions.
Immunity tests
Electrostatic
discharge (ESD)
IEC 61000-4-2
Electrical fast
transient/burst
IEC 61000-4-4
Surge
IEC 61000-4-5
Conformity
Group 1
Class B
N/A
Conforming
Test level IEC 60601
± 6 kV contact
± 8 kV air
±2KV for power lines
±1 kV for I/O lines
1 kV differential mode 1 kV differential mode
±2 KV common mode ±2 KV common mode
Electromagnetic environment – guide
The NEFTI device uses RF energy
only for charging the battery.
Its RF emissions are therefore
very low and in all likelihood
do not interfere with nearby
electronic equipment.
The NEFTI device is intended to
be used in all buildings, including
the home and buildings connected
directly to the low voltage public
power grid for residential applications.
Conformity level
environment – guide
Information for using the
device and charging the
battery. The floor must be
± 6 kV contact wood, concrete or ceramic.
± 8 kV air If the floor is covered
with a synthetic material,
the relative humidity
must be at least 30%.
The quality of the mains
2KV for power lines
supply must be that of a
±1 kV for I/O lines typical commercial hospital
when charging the battery
The quality of the mains
supply must be that of
a typical commercial
charging the battery.
11
Electromagnetic
or hospital when