Canon imageRUNNER 2545i Guía De Usuario página 24

• To avoid damage to the power cord and creating a fire hazard, always turn OFF the
main power switch, and unplug the interface cable when moving the machine.
Otherwise, the power cord or interface cable may be damaged, resulting in a fire or
electrical shock.
• Make sure that the power plug is firmly inserted into the power outlet if the machine
was moved. Do not use the machine while the connection is loose, as doing so may
cause a fire.
• When plugging or unplugging a USB cable when the power plug is plugged into an
AC power outlet, do not touch the metal part of the connector, as this may result in an
electrical shock.
• Do not drop paper clips, staples, or other metal objects inside the machine. Also, do
not spill water, liquids, or flammable substances (alcohol, benzene, paint thinner,
etc.) inside the machine. If these items come into contact with a high-voltage area
inside the machine, it may result in a fire or electrical shock. If these items are
dropped or spilled inside the machine, immediately turn OFF the main power switch,
and disconnect the power cord from the power outlet. Then, contact your local
authorized Canon dealer.
CAUTION
• Do not place heavy objects on the machine, as they may tip over and fall resulting in
personal injury.
• Close the feeder/platen cover gently to avoid catching your hands, as this may result
in personal injury.
• Do not press down hard on the feeder/platen cover when using the platen glass to
make copies of thick books. Doing so may damage the platen glass and result in
personal injury.
• Do not place your hands, hair, clothing, etc., near the exit and feed rollers. Even if the
machine is not in operation, your hands, hair, or clothing may get caught in the
rollers, which may result in personal injury or damage if the machine suddenly starts
printing.
• Paper that has just been output from the machine may be hot. Be careful when
removing or aligning paper from the output tray. Touching paper right after it is
output may result in low-temperature burns.
• Do not touch the finisher while the machine is printing, as this may result in personal
injury.
xxiii