Publicidad
2.11 Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive first. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom side
to install those required drivers. Therefore, the drivers you install can work properly.
2.12 Installing Windows
TM
Vista
If you want to install Windows
on your SATA / SATA2 / SATA3 HDDs with RAID functions, please refer to the
document at the following path in the Support CD for detailed procedures:
..\ RAID Installation Guide
RAID mode is not supported under Windows
2.13 Installing Windows
TM
Vista
If you want to install Windows
/ XP 64-bit OS on your SATA / SATA2 / SATA3 HDDs without RAID functions, please
follow below procedures according to the OS you install.
2.13.1 Installing Windows
Functions
If you want to install Windows
HDDs without RAID functions, please follow below steps.
AHCI mode is not supported under Windows
Using SATA / SATA2 / SATA3 HDDs without NCQ function
STEP 1: Set Up UEFI.
A. Enter UEFI SETUP UTILITY
B. Set the option "SATA Mode Selection" to [IDE].
STEP 2: Install Windows
38
®
8 / 8 64-bit / 7 / 7 64-bit / Vista
64-bit With RAID Functions
®
8 / 8 64-bit / 7 / 7 64-bit / Vista
®
8 / 8 64-bit / 7 / 7 64-bit / Vista
64-bit / XP / XP 64-bit Without RAID Functions
®
8 / 8 64-bit / 7 / 7 64-bit / Vista
®
XP / XP 64-bit Without RAID
®
XP / XP 64-bit OS on your SATA / SATA2 / SATA3
Advanced screen
®
XP / XP 64-bit OS on your system.
ASRock Z77 Extreme3 Motherboard
TM
/
TM
TM
/ Vista
64-bit
®
XP / XP 64-bit.
TM
/
TM
TM
/ Vista
64-bit / XP
®
XP / XP 64-bit.
Storage Configuration.
Publicidad
