Christie Q Serie Guia De Inicio Rapido página 13

Setting up the second projector (Set B)
1.
Turn on Set B.
2.
Reset the adjustment of KEYSTONE and 3D KEYSTONE on Set B.
EASY MENU ┳ KEYSTONE
┛ 3D KEYSTONE
ADVANCED MENU > SETUP > GEOMETRY CORRECTION ┳ KEYSTONE
3.
Adjust the image size and position of Set B with the ZOOM, FOCUS and
LENS SHIFT features such that the image can be superimposed well to the
image of Set A.
4.
Display the menu with the MENU button.
5.
Use the ▲/▼/◄/► buttons to go into the following menu.
EASY MENU > ADVANCED MENU > OPTION > SERVICE >
COMMUNICATION > STACK
STACK menu will appear on screen
6.
Select STACK MODE then MAIN, and press the ► button twice to finish the
settings.
For more details of setup and adjustments, refer to the User's Manual (detailed).
18 Troubleshooting
Check the following web address where you may find the latest information for this
projector.
NOTE • The information in this manual is subject to change without notice.
• The illustrations in this manual are for illustrative purposes. They may differ
slightly from your projector.
• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
DWU1052/DHD1052
Quick Setup Guide
http://www.christiedigital.com
12
┛ 3D KEYSTONE
020-000860-01 Rev. 1 (12-2015)
LIT MAN USR DWU/DHD1052 CON