Vertilux Vti 025 Serie Manual De Programación página 5

Setting the lower limit
1. Using the remote, move the shade and stop it
4"
approximately above the desired lower limit
position. Press and hold the
located on the back of the remote until the
motor "jogs".
2.
Move the shade down to the desired lower limit
position and then press and hold the
button until the motor
limit is now set.
Setting intermediate limits (optional)
Up to 4 optional intermediate limits can be programmed between the upper and lower limit. Press
and hold the up or down button
without any stop at the intermediate limits.
1.
Move the shade approximately
desired intermediate limit position and stop it.
Press and hold the programming button
on the back of the remote until the motor
(Openning program).
2. Move the shade up or down and stop it at the
desired intermediate limit position and then press
programming button
and hold the
"jogs" again (Closing Program). The intermediate
limit is now set.
*Repeat the same steps for any additional intermediate limit.
Erasing an intermediate limit
The upper limit cannot be erased or modified once it has been set.
1. Move the shade to the limit you want to erase.
2. Press and hold the
located on the back of the remote for approximately
7 s until the motor "jogs"
been erased.
programming button
programming
"jogs" again. The lower
for 2 s if you want the motor to reach the
4"
from the
located
"jogs"
until the motor
programming button
twice. The limit has
© 2021. Vertilux, Ltd. All Rights Reserved. Last revised: May 2021.
~4"
LOWER
LIMIT
~4"
INTERMEDIATE
LIMIT
PROGRAMMING
BUTTON
PROGRAMMING
BUTTON
upper or lower limit
PROGRAMMING
BUTTON
PROGRAMMING
BUTTON
PROGRAMMING
BUTTON
vertilux.com
4