Checking Your Connections; Connecting To The Management Console; Installing The Scc - Riverbed SteelHead Manual De Instrucciones

Installing SteelHead Product Family Appliances (English)
Using the provided crossover cable, plug the cable into the WAN port of the SteelHead and the WAN

router.
Note: If you have a Four-Port Copper Gigabit-Ethernet PCI-X card, repeat the installation steps. For detailed
information about installing additional bypass cards, see the Network Interface Card Installation Guide.
You can now optimize WAN traffic using the SteelHead.

6. Checking Your Connections

Check the LED status lights to verify that the appliance is connected properly.

To check your connections, enter a ping command from the management interface:

ping -I <primary-IP-address> <primary-default-gateway>
ping -I <in-path-IP-address> <in-path-default-gateway>

7. Connecting to the Management Console

Enter the URL for the Management Console in the location box of your Web browser:

http://host.domain or https://host.domain
The Management Console appears, displaying the Welcome page.
In the Account text box, type admin.

In the Password text box, type the password you assigned.

Click Login to display the Home page.


Installing the SCC

This section describes how to install and configure the SCC, which in turn lets you configure and manage
remote SteelHeads from a central location. For detailed information, see the SteelCentral Controller for
SteelHead Installation Guide.
10
Installing the SCC
Getting Started Guide