Connecting To The Mobile Controller; Configuring The Mobile Controller; Connecting The Mobile Controller To Your Network; Logging In To The Mobile Controller - Riverbed SteelHead Manual De Instrucciones

Installing and Deploying the Mobile Controller

5. Connecting to the Mobile Controller

Plug the serial cable into the Console port and a terminal.

Make sure the Console port settings are 9600, 8 data bits, no parity, 1 stop bit, no flow control.

Start your terminal emulation program (for example, HyperTerminal or Tera Term Pro).

At the login prompt, type admin. The default password is password.


6. Configuring the Mobile Controller

The configuration wizard automatically starts when you log in to the command-line interface for the first
time.
Follow the prompts to configure network and in-path interface settings for the Mobile Controller.

Confirm your settings; then type exit to log out of the system.


7. Connecting the Mobile Controller to Your Network

Plug the straight-through cable into the Primary port of the Mobile Controller and the LAN switch.

The primary port can be any port on your LAN switch that is configured to connect to a host.
Check the LED status lights to verify that the appliance is connected properly.


8. Logging in to the Mobile Controller

Enter the URL for the Mobile Controller in the location box of your Web browser:

http://host.domain or https://host.domain
The Mobile Controller interface appears, displaying the Welcome page.
In the Account text box, type admin.

In the Password text box, type the password you assigned.

Getting Started Guide
Installing SteelHead Product Family Appliances (English)
17