Connecting To The Interceptor; Configuring The Interceptor - Riverbed SteelHead Manual De Instrucciones

Installing SteelHead Product Family Appliances (English)
Plug the power cord or cords into the appliance and an AC outlet.

If your appliance has a master power switch, press the master power switch (ON).

Press the system power switch on the front of the appliance.

CAUTION: In all European electrical environments, you must ground the Green/Yellow tab on the power cord. If you
do not ground the Green/Yellow tab, it can cause electrical shock.

4. Connecting to the Interceptor

Plug the serial cable into the Console port and a terminal.

Make sure the Console port settings are 9600, 8 data bits, no parity, 1 stop bit, no flow control.

Start your terminal emulation program (for example, HyperTerminal or Tera Term Pro).

At the login prompt, type admin. The default password is password.


5. Configuring the Interceptor

The configuration wizard automatically starts when you log in to the command-line interface for the first
time.
Follow the configuration wizard prompts:

Step 1: Hostname? Interceptor
Step 2: Use DHCP? no
Step 3: Primary IP address? 172.8.1.1
Step 4: Netmask? 255.255.0.0
Step 5: Default gateway? 172.8.1.254
Step 6: Primary DNS server? 172.8.1.10
Step 7: Domain name? domain.com
Step 8: Admin password? xxxyyy
20
Installing the Interceptor
Getting Started Guide