BLEEDER
PROTECTOR
A
OPENED VALVE
CLOSED VALVE
(A)
(A)
42
Instructions Manual
BRAKE FLUID EXCHANGE
necessary. It is recommended to exchange it after
two seasons.
Recommended fluid: Brake Fluid NBR 9292 – DOT
4
System Capacity – 1 Litter
Necessary Material:
A piece of plastic hose (Approximately 50cm
length), with diameter corresponding to the brake
bleeder nipple.
A clean recipient.
Brake Fluid (new).
Procedure for the exchange:
Put the machine on a flat, levelled surface.
After the fluid exchange, bleed the system according
to instructions on page 43.
1.
Find the bleeder bolt that is located on the
brake calliper.
2.
Remove the rubber protector from the bleeder.
3.
Install the hose on the bleeder nipple, leaving
the other end immersed in the recipient,
containing a little of clean brake fluid. (Picture
69).
4.
Using an open or closed wrench, open the
bleeder.
5.
Open the valve (A).