Eiko LEDP-18T8FU6 Instrucciones De Instalación De Producto página 3

WARNING - Risk of fire or electric shock. Install this kit only in the luminaires that has the
construction features and dimensions shown in the photographs and/or drawings.
WARNING - To prevent wiring damage or abrasion, do not expose wiring to edges of
sheet metal or other sharp objects.
"The end retrofit luminaire has been modified and can no longer operate the originally
intended lamp."
WARNING - Risk of fire or electric shock. Do not use this retrofit kit in luminaires
employing shunted bi-pin lampholders。"
"Do not make or alter any open holes in an enclosure of wiring or electrical components
during kit installation. Only those open holes indicated in the photographs and/or drawings
may be made or altered as a result of kit installation. Do not leave any other open holes in an
enclosure of wiring or electrical components".
WARNING - Fig.1 means "DOUBLE INSULATION"。
"Installers should not disconnect existing wires from lampholder terminals to make new
connections at lampholder terminals. Instead installers should cut existing lampholder
leads away from the lampholder and make new electrical connections to lampholder lead
wires by employing applicable connectors."
THE RETROFIT ASSEMBLY IS ACCEPTED AS A COMPONENT OF A FLUORESCENT
LUMINAIRE WHERE
DETERMINED BY CSA OR AUTHORITIES HAVING JURISDICTION.
"Has been evaluated for use with ceiling luminaires and type IC recessed luminaires where
the lamps can be totally enclosed (i.e. Can be installed in luminaires with a diffuser)".
Fig. 1
THE SUITABILITY OF
II
THE COMBINATION SHALL BE