Publicidad
Two Step Blowout
Note: During the last dispense of a program, you can perform a two step blowout to prevent liquid
from being aspirated back into the GripTips:
• Press and hold the Run Key to dispense without blowin.
• Remove the GripTips from the target vessel.
• Release the Run Key to start blowin.
Tip Spacing (VOYAGER only)
In each pipetting mode, the available tip spacing positons are displayed at the
bottom of the screen. The current position is highlighted.
At any program step press or to move the tip position to the next spacing.
To modify the tip spacing positions go to the "Tip Spacing" menu, accessible
from the main menu of the pipette or within every pipetting mode.
Select the positions to be changed (First, Middle, Last) and press OK. Use
and to move the tips to the desired position, click OK and than SAVE.
Equipment Disposal
Electronic pipettes must not be disposed of with unsorted municipal waste.
Dispose of electronic pipettes in accordance with the laws and regulations in your area
governing disposal of devices.
Manufacturer
INTEGRA Biosciences AG
CH-7205 Zizers, Switzerland
T +41 81 286 95 30
F +41 81 286 95 33
info@integra-biosciences.com
www.integra-biosciences.com
161951_V10_QSG_Electronic_Pipettes.docx
INTEGRA Biosciences Corp.
Hudson, NH 03051, USA
T +1 603 578 5800
F +1 603 577 5529
3/7
Publicidad
