Budda BULLY Manual De Instrucciones página 26

FRONT PANEL FUNCTIONS: WHAT THEY DO AND HOW TO USE THEM
Channel 3
This is the 'high gain' channel. Depending on the specific setting of the controls, it can produce warm
overdriven tones, seriously heavy thrash tones and anything in-between.
(23) Channel Select
Works the same as on Channel 1 but for Channel 3, including switching on Over-Boost. Can also be
switched on the footcontroller.
(24) Over-Boost
If Over-Boost is selected then this control becomes active. On Channel 3 this acts like a tube-driven,
mid-focused, clean boost before the main preamp stage. As the signal then goes into a high gain
preamp, this will help to overdrive this channel further, giving even more saturation and sustain that's
great for certain 'shredding' guitar techniques such as tapping, legato, and sweep picking. Maximum
boost is ~20dB.
(25) Gain
Works the same as on Channel 1 but for Channel 3 however, as more gain is available, it will have a more
radical effect to your tone, producing more overdrive the further clockwise it is turned.
(26) Treble
This passive control sets the level of the high frequencies for Channel 3.
(27) Mid
This passive control sets the level of the mid range frequencies for Channel 3.
(28) Bass
This passive control sets the level of the low frequencies for Channel 3.
(29) Volume
Works the same as on Channel 1 but for Channel 3.
(30) Reverb
Works the same as on Channel 1 but for Channel 3.
(31) Presence
Works the same as on Channel 1 but for Channel 3.
(32) Resonance
Works the same as on Channel 1 but for Channel 3.