Crispers
CRISPERS AND CRISPER COVER
To remove and install the crisper:
1. Grip the crisper firmly and slide out completely.
2. Replace the crisper by placing the crisper properly in
position and gently sliding it back into place.
Your refrigerator may be equipped with a slide control to
raise or lower the humidity levels or your crispers. This
feature will increase the storage life of your fruits and
vegetables. Simply adjust the controls to the appropriate
setting for items you are storing in the crispers. Low
settings allow moist air to exit the crisper, for optimum
storage of fruit and/or vegetables that have skins. High
settings retains moist air in the crisper, for optimum
storage of leafy fresh vegetables.
6
REMOVING OR REPLACING THE CRISPER
COVER
1. Carefully grasp the crisper cover and slide out to
remove.
2. To replace, slide the rear of the crisper cover into the
right and left slots above the crisper area and gently
slide back into place.
49-1000110 Rev. 0