Fermax FPAC-MAX Manual De Instalación página 29

Cod. 970077b V04_21
Fig. 6 Device selection window in AC-MAX HW software
7. In the open window, which can also be accessed by selecting
the top menu of the AC-MAX HW software, enter communication parameters such as
IP IP
Address, Port, Default
8. Also, set your communication password to secure and encrypt communication with the
reader.
[2] RS485 EPSO3
9. Select option
EPSO3
Protocol Configurationarea, in the Address
MAX FINGERPRINT READER on the RS485 bus of the AC-MAX central unit in the range of
101-115.
10. Upload the settings to the reader with the Send
FPAC-MAX v1.0 fv1.4
Gateway, Subnet Mask
and
in the Communication
to Device button.
the Settings
.
protocol
field, and in the
field,
assign an uns busyaddress to FPAC-
command from
RS485
13 | 16