Recalling Record; How To Maintain And Store The Unit; How To Prevent A Malfunction - VISIOMED TensioFlash KD-558 Manual Del Usuario

- During measurement do not speak or shake as it may affect the
accuracy of the result.
- If you want to stop the measurement during measurement process,
just press the START button to stop immediately.
- Please consult a health care professional for interpretation of
pressure measurements.

RECALLING RECORD

This device contains 2 units of 30 memories each (U1 and U2).
During the measurement, select the storage unit.
1. Press the MEM button to display the stored results. Now the
LCD displays the amount of the results in the current bank.
Press START button to change over to other bank. Confirm your
selection by pressing MEM button. The current bank can also
be confirmed automatically after 5 seconds with no operation.
2. The LCD will display the average value of the last three results
in this bank. If no result stored, LCD will show dashes « - »
3. Press MEM button to review the result from the most recent
to the oldest.
4. Press the button START to turn off the monitor manually,
the monitor will turn off automatically after 1 minute of no
operation.
Deleting measurements from the memory:
When the LCD displays the stored results in
a bank, press the MEM button during three
seconds. All results in the current memory
bank will be deleted after three « beep ».
Press the MEM or START button to turn of
the monitor.
26 Visiomed - KD-558 - 032016

HOW TO MAINTAIN AND STORE THE UNIT

1. Use a dry soft cloth to clean the unit. If
necessary, use a cloth lightly dampened
with tap water.
2. Do not use alcohol, benzene, thinner
or other harsh chemicals to clean the
device or cuff.
3. Before using please wash your hand. Do
not wash or wet the cuff.
4. Avoid placing the unit where direct
sunlight, high humidity or dust.
Note: When the unit will not be used for a
long period, be sure to remove the batteries.
Otherwise, the batteries may leak and
damage the unit

HOW TO PREVENT A MALFUNCTION

- Do not drop the device and avoid sudden jars or shocks.
- Do not insert other objects into any holes.
- Do not attempt to disassemble the unit.
- Do not crush the pressure cuff.
- The monitor might not meet its performance specifications or
cause safety hazard if stored or used outside the specified tem-
perature and humidity ranges in specifications.
- The monitor can maintain the safety and performance charac-
teristics for a minimum of 10,000 measurements.
Visiomed - KD-558 - 032016 27