Iso Din Head Unit Provision - Metra 99-7519B Instrucciones De Instalación

ISO DIN Head Unit Provision

1. Turn over the 99-7519B housing, take
the climate control and screws removed
from the factory panel and attach the
climate control to the kit housing using
the factory screws. (Figure A)
2 Slide the pocket into the bottom section
of the kit housing. (Figure B)
3. Mount the ISO Brackets to the head unit
with the screws supplied with the unit.
(Figure C)
4. Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from Metra
or AXXESS. Test the unit for proper
operation.
5. Slide the head unit into the radio
opening until the side clips engage.
(Figure D)
6. Snap the Trim plate into the Radio
Housing. Reassemble dash in reverse
order of disassembly. (Figure D )
(Figure A)
Kit Assembly 99-7519B
8
(Figure B)
(Figure C)
(Figure D)