Kit Assembly; Din Head Unit Provision - Metra 99-7519B Instrucciones De Instalación

DIN Head Unit Provision

1. Turn over the 99-7519B housing, take
the climate control and screws removed
from the factory panel and attach the
climate control to the kit housing using
the factory screws. (Figure A)
2 Slide the pocket into the bottom section
of the kit housing. (Figure B)
3. Slide the DIN cage into the Radio
Housing and secure by bending the
metal locking tabs down. (Figure C)
4. Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from Metra
or AXXESS. Test the unit for proper
operation.
5. Slide the aftermarket head unit into
the cage and secure. Reassemble
dash in reverse order of disassembly.
(Figure D)
(Figure A)
Kit Assembly 99-7519B
7
(Figure B)
(Figure C)
(Figure D)