Duotilt; Sound Field Selector; Setting Up And Connecting Speakers; Lr 112 And Lr 115 Cabs In Full-Range Mode - HK Audio LINEAR 3 Manual De Instrucciones

LINEAR 3 MANUAL

2.2 DuoTilt™

The newly developed, integrated DuoTilt™
speaker stand mounting collar enables you to
make far more efficient use of sound energy.
Offering two different angles - 7.5° and 15°
- it lets you line up speakers so that they face the audience
rather than walls and cei-
lings. Troublesome ceiling
reverberations are minimi-
zed, and you end up with
a focused sound that is
clear and punchy.
Beyond that, the
DuoTilt™ stabilizes the
cabinet at its center of
gravity -
no wobbling, tilting, or
unintentional turning.
Your choice of DuoTilt™
angle – 7.5° or 15 ° -
depends on the required
speaker height and the
size of the room.

2.3 Sound Field Selector

As its name would indicate, the Sound Field
Selector lets you choose the sound field that
best suits the venue. This feature is available on
LR 112 and LR 115 full-range speakers.
Many cabinets sound good in larger halls but far too strident
at club gigs or in the rehearsal room. Conversely, the horns in
many cabinets are too weak to cover bigger venues. HK AUDIO
Linear 3™ Series offers the perfect solution to this problem.
Close
Regular
Select Close for small venues or rehearsal rooms, Regular for
bigger halls.
The LightGuide™ Display indicates the position of the switch.
• When set to Close, the SIGNAL LED
in the LightGuide™ Display lights up
yellow.
• When set to Regular, the SIGNAL LED
color lights up green.
The new Sound Field
Selector lets you pre-select
the right setting and adjust
the high frequency range to
suit the given room.
REGULAR CLOSE
3. SETTING UP AND
CONNECTING SPEAKERS
HK AUDIO speaker cables with a diameter of 2 x 2.5 mm
recommended for connecting cabinets, power amps or powered
mixing consoles. Cables are available in the following lengths:
1. LSC 3, item no.: 193283, 3 m
2. LSC 7, item no.: 193263, 7 m
3. LSC 15, item no.: 193323, 15 m
Recommended amplifier power output
To power Linear 3 cabinets and have enough headroom avail-
able for dynamic musical signals, connect amps rated from
400 W @ 4 Ω RMS to 600 W RMS @ 4 Ω per amp channel.
The PEAK LED in the LightGuide™ Display illuminates to warn
of impending overload.

3.1 LR 112 and LR 115 Cabs in Full-range Mode

Power Amplifier
Powermixer
Connect the powered mixer's or power amp's speaker output to
the LR 112 or LR 115 full-range cabinet's input (IN).
Important note:
An electrical connection between the cord and input jack is not
established until the Speakon connector locks into place.
Twist the Speakon connector clockwise until it engages.
2 are
7