Steren MIX-130 Manual De Instrucciones página 8

28.- Master Output
The master output allows you to connect to an amplifi er and can
be adjusted with the MASTER control.
29.- Ground Switch
When the mixer is powered on, place the system in wait mode
(without any signal present) and place the switch to the left side.
Power the device off and then place the switch to the right side.
Power the mixer on and in wait mode listen in order to determine
which of the two switch sides has the least
background noise.
30.- Voltage Selector
Before connecting the power cable, make sure the voltage
switch is in the correct position depending on where the mixer
will be installed.
ENGLISH-8