ResMed S9 Guia Del Usuario página 3

English
Thank you for choosing the ResMed S9 Oximeter adapter. The S9 Oximeter adapter
connects a NONIN Xpod
saturation and pulse rate) is recorded on the SD card inserted into the S9 device.
Please read the entire guide before using this device.
S9 Oximeter adapter
Refer to illustration A.
1. Release button
2. Oximeter port
3. Adapter connector
4. Adapter clip
Associated accessories
• Xpod oximeter
• Xpod fixation clip
• Finger pulse sensor
• S9 Oximetry accessories pack (including Xpod oximeter, Xpod fixation clip and
3m Oximeter soft sensor reusable).
Setup
Before setting up, disconnect the S9 device from the power outlet.
Refer to illustrations C and D.
1. Ensure an SD card is inserted into the SD card slot on the S9 device.
2. Align the S9 Oximeter adapter clips with their corresponding sockets and push
the adapter onto the S9 device. Ensure the adapter clips click into place.
3. Connect the Xpod oximeter to the oximeter port on the S9 Oximeter adapter.
™ oximeter to your S9 device. Oximetry data (oxygen
Rear panel of S9 device
Refer to illustration B.
1. DC power inlet
2. Adapter clip socket
3. Module/Adapter port
4. SD card slot
1
English