Safety Precautions; For Safety - Nobles Speed Scrub 2401 Manual Del Operador

OPERATION

SAFETY PRECAUTIONS

This machine is intended for commercial use only.
It is designed exclusively to scrub hard floors in
an indoor environment and is not constructed for
any other use. Use only recommended pads,
brushes and cleaning detergents.
All operators must read, understand and practice
the following safety precautions.
The following warning alert symbol and the "FOR
SAFETY" heading are used throughout this manual as
indicated in their description:
WARNING: To warn of hazards or unsafe
practices which could result in severe personal
injury or death.
FOR SAFETY: To identify actions which must be
followed for safe operation of equipment.
Failure to follow these warnings may result in:
personal injury, electrocution, electrical shock,
fire or explosion.
WARNING: Do Not Use Flammable Liquids Or
Operate Machine In Or Near Flammable Liquids,
Vapors Or Combustible Dusts.
WARNING: Do Not Pick Up Flammable
Materials Or Reactive Metals.
WARNING: Keep Sparks And Open Flame
Away. Keep Battery Hood Open When Charging.
WARNING: Disconnect Battery Cables Before
Servicing Machine.
4
Home Find... Go To..
The following information signals potentially
dangerous conditions to the operator or
equipment:

FOR SAFETY:

1. Do not operate machine:
– Unless trained and authorized.
– Unless operation manual is read and
understood.
– In flammable or explosive areas.
2. Before starting machine:
– Make sure all safety devices are in place
and operate properly.
3. When using machine:
– Go slow on inclines and slippery surfaces.
– Use care when reversing machine.
– Do not carry riders on machine.
– Report machine damage or faulty
operation immediately.
– Always follow mixing and handling
instructions on chemical containers.
4. Before leaving or servicing machine:
– Stop on level surface.
– Turn off machine.
5. When servicing machine:
– Avoid moving parts. Do not wear loose
jackets, shirts, or sleeves.
– Block machine tires before jacking
machine up.
– Use hoist or jack of adequate capacity to
lift machine.
– Disconnect battery connections before
working on machine.
– Wear protective gloves and safety glasses
when handling batteries or battery cables.
– Avoid contact with battery acid.
– Use manufacturer supplied or approved
replacement parts.
Speed Scrubt 2401/2601 (07–02)