Amibot vision Manual De Instrucciones página 36

EN
Troubleshooting
Control
failure via
07
the remote
control.
Appliance
08
suction lost.
If none of the above-mentioned steps provide a solution for your
problem, please contact the AMIBOT after-sales department.
1. The remote
control batteries
are dead.
2. The robot has
run out of
battery or is
switched off.
3. Interference
with nearby
appliances.
4. Out of range.
1. The dustbin is
full.
2. The protection
filter is dirty.
3. The central
brush or the
side brushes are
blocked.
34
1. Replace the remote control
batteries.
2. Switch the robot on by
pressing the ON/OFF power
button and make sure that it
has some battery.
3. Move the robot away from
appliances that could
interfere with it.
4. Keep a distance of at least
5 metres.
1. Empty the dustbin and clean
the filters.
2. Clean the protection filter.
3. Remove any debris from the
brushes. Check that there is
no dirt obstructing the robot.