General Power Tool Safety Rules; Electrical Safety; Personal Safety - Homelite HHT400T Manual De Utilización

EN
FR DE ES IT PT
Your hedge trimmer has been engineered and
manufactured to Homelite's high standard for
dependability, ease of operation, and operator safety.
When properly cared for, it will give you years of rugged,
trouble-free performance.
Thank you for buying a Homelite product.
WARNING:
To reduce the risk of injury, the user must read
and understand the operator's manual before
using this product.

GENERAL POWER TOOL SAFETY RULES

WARNING:
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions
may result in electric shock, fire and serious
injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your mains-
operated corded power tool or battery-operated (cordless)
power tool.
WORK AREA SAFETY
Keep work area clean and well lit. Cluttered or dark
■
areas invite accidents.
Do not operate power tools in explosive
■
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
Keep children and bystanders away while
■
operating a power tool. Distractions can cause you
to lose control.

ELECTRICAL SAFETY

Power tool plugs must match the outlet. Never
■
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
Avoid body contact with earthed or grounded
■
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
Do not expose power tools to rain or wet
■
conditions. Water entering a power tool will increase
the risk of electric shock.
Do not abuse the cord. Never use the cord for
■
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
HHT400T-23lgs (May 2011).indd 7 HHT400T-23lgs (May 2011).indd 7
NL SV DA NO FI HU CS RU
English
■
■

PERSONAL SAFETY

■
■
■
■
■
■
■
■
POWER TOOL USE AND CARE
■
7
RO PL SL HR ET
moving parts. Damaged or entangled cords increase
the risk of electric shock.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personal injury.
Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, non-skid safety shoes hard hat, or hearing
protection used for appropriate conditions will reduce
personal injuries.
Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and /or battery pack, picking up
or carrying the tool. Carrying power tools with your
finger on the switch or energising power tools that
have the switch on invites accidents.
Avoid accidental starting. Ensure the switch is
in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your finger on the
switch or energizing power tools that have the switch
on invites accidents.
Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
Do not overreach. Keep proper footing and
balance at all times. This enables better control of
the power tool in unexpected situations.
Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewellery or
long hair can be caught in moving parts.
If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used. Use of dust
collection can reduce dust-related hazards.
Do not force the power tool. Use the correct
LT LV SK BG
2011/5/20 2011/5/20 4:07 4:07