Hedge Trimmer Safety Warnings - Homelite HHT400T Manual De Utilización

EN
FR DE ES IT PT
power tool for your application. The correct power
tool will do the job better and safer at the rate for
which it was designed.
Do not use the power tool if the switch does not
■
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
Disconnect the plug from the power source
■
before making any adjustments, changing
accessories, or storing power tools. Such
preventative safety measures reduce the risk of
starting the power tool accidentally.
Store idle power tools out of the reach of children
■
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool. Power tools are dangerous in the hands
of untrained users.
Maintain power tools. Check for misalignment or
■
binding of moving parts, breakage of parts and
any other condition that may affect the power
tool's operation. If damaged, have the power tool
repaired before use. Many accidents are caused by
poorly maintained power tools.
Keep cutting tools sharp and clean. Properly
■
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc.
■
in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions
and the work to be performed. Use of the power
tool for operations different from intended could result
in a hazardous situation.
SERVICE
Have your power tool serviced by a qualified
■
repair person using only genuine replacement
parts. This will ensure that the safety of the power
tool is maintained.

HEDGE TRIMMER SAFETY WARNINGS

Keep all parts of the body away from the cutter
■
blade. Do not remove cut material or hold material
to be cut when blades are moving .Make sure
the switch I off when clearing jammed material.
A moment of inattention while operating the hedge
trimmer may result in serious personal injury.
Carry the hedge trimmer by the handle with
■
the cutter blade stopped. When transporting or
storing the hedge trimmer always fit the cutting
device cover. Proper handling of the hedge trimmer
will reduce possible injury from the cutter blades.
Keep cable away from cutting area. During
■
HHT400T-23lgs (May 2011).indd 8 HHT400T-23lgs (May 2011).indd 8
NL SV DA NO FI HU CS RU
English
ADDITION
■
■
■
8
RO PL SL HR ET
operation the cable may be hidden in shrubs and can
be accidentally cut by the blade.
Advice to check the hedge trimmer for foreign
objects, e.g. wire fences.
Recommendation for the use of a residual current
device with a tripping current of 30mA or less.
Instruction to hold the hedge trimmer properly, e.g.
with both hands if two handles are provided.
LT LV SK BG
2011/5/20 2011/5/20 4:07 4:07