KTM Power Parts 69034931066 Manual Del Usuario página 5

Scope of delivery:
1x reverse gear change kit
1x oval head screw M6x20
1x flange nut M6
1x oval head screw M6x30
2x hexagonal collar screws M5x12
Assembly
Assembly with standard footrest
Remove shift rod.
5
Fit the reverse gear change with 2x M5x12 hexagonal collar screws. (Loctite
243).
Fit the shift rod with M6x20 oval head screws and M6 flange nuts at the drill
hole (B) behind the reverse gear change. Fit the shift rod with the original
B
screw at drill hole (A) behind the shift lever.
A
Shift lever setting
Remove lock nuts (1) of the shift rod. By turning the shift rod , you can set
the shift lever to the position that is most ergonomic for your use. When you
have found the right position, tighten the lock nuts.
1
1
Turn the shift rod only so far as to leave at least five threads of the shift rod
in the heim joint.