Safety Advice - BGS technic 8999 Manual De Instrucciones

Brake Bleeder and Vacuum Tester
GENERAL
The brake vacuum tester is a multi-functional vacuum pump to test a variety of basic vehicle settings
and functions is appropriate. With the aid of some of the accessories supplied caps and dies, it can
also be used as a brake bleeder. The gauge of the vacuum pump is calibrated and measures both
Inches and millimeters. This model is thus suitable for domestic and foreign vehicles. Almost all
internal combustion engines, whether diesel or gasoline engines, use the vacuum for a variety of
functions. A tool like this vacuum pump is essential if you want to keep performance and correct
working of the engine.

SAFETY ADVICE

All safety precautions should be read and followed.
Serious Injury or damage to the vehicle can occur if the safety precautions are not followed. If your
car has an airbag, be equipped and keep extreme caution when working on and around the
dashboard.
- Always make sure that the gear is placed on park position and the parking brake is applied.
- Wear eye protection principle.
- Always keep a dry chemical fire extinguisher (Class B).
- Be especially careful at turning or heated vehicle components.
- Do not smoke near gasoline components or the car battery.
- Make sure when working on the car always have adequate ventilation. Exhaust fumes are
poisonous.
- Never disconnect a power connection when the ignition is turned ON, unless this is explicitly
mentioned in the instructions.
- Don't touch the electrical connections.
- Do not hang extension cords for power tools and hand lamps near, over or on a current
connection of the vehicle.
- When bleeding the brake, use only the included container and observe the assembly
information, otherwise brake fluid can enter and destroy the vacuum pump.
SW-Stahl und Werkzeugvertriebs GmbH
5
d i e
6 e s s a r t S
h c s m e R
Tel. +49 (0) 2191 / 46438-0
r e F ax +49 (0) 2191 / 46438-40 s u k r e v e
7 9 8 2 4 - D e
BGS 8999
L
d . l h a t s w s @ o f n i : l i