Intended Use; Safety Informations - BGS technic 8007 Instruction Manual

COMPONETS
1 Adapter R 1/8" DIN 2999
2 Adapter 1/8"x27 NPT
3 Adapter 1/4"x18 NPT
4 Adapter 3/8"x20 UNF
5 Adapter 1/2"x20 UNF
6 Adapter M10x1.0
7 Adapter M12x1.5
8 Adapter M14x1.5
9 Adapter M16x1.5
10 Adapter M18x1.5
11 Pressure gauge, Tolerance
0-10 bar (0-140 PSI)
12 Pressure release valve
13 Pressure hose,
max. pressure 20.7 bar (300 PSI)
14 Elbow piece 90°
15 Quick coupler
16 Replacement sealing rings
ATTENTION
Read and understand all instructions and information in this manual.
Failure to follow the instructions and information below may cause serious injury and damage.
Keep the manual for future reference in a safe and dry place.

INTENDED USE

The oil pressure tester was designed for an accurate diagnosis of the engine oil pressure. Due to the
many adapters, the tester has a wide range of applications and can be used for diagnosis on many
car models, small vans and agricultural devices with combustion engines, such as on models from
Alfa Romeo, Audi, BMW, Citroen, Daihatsu, Fiat, Ford, GM, Opel, Vauxhall, Honda, Hyundai, Isuzu,
Jaguar, Lada, Lancia, Mazda, Mercedes-Benz, Mitsubishi, Nissan, Peugeot, Renault, Rover, Saab,
Skoda, Subaru, Suzuki, Toyota, VW, Volvo.

SAFETY INFORMATIONS

•
Follow the manufacturer's specifications. This manual is supposed to inform you about the tool
itself and does not replace specific servicing handbooks.
•
Before use, make sure that the tool is in perfect condition.
•
Regularly check the condition of this product and replace damaged parts directly.
•
Inform yourself before use about the correct use of this product taking into account the
necessary safety measures.
•
Keep children and unauthorized persons away from the working area.
•
Do not allow children to play with this tool or its packaging.
•
Ensure the working area has adequate lighting.
•
Keep working area clean and tidy, dry and free from unrelated materials
•
Do not allow untrained persons to use this tool kit
•
Only use oil which is approved by the vehicle manufacturer. Oil specifications can be found in
the vehicle owner's manual or in the vehicle-specific service literature.
•
Close the oil chanal bore properly after the measuring process. Oil chanal bore that are not
properly closed can lead to engine damage.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Oil Pressure Test Kit
:
+/-5 %
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 8007
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed