Installation Instructions - allen+roth 1282MR-30-113 Manual De Instrucciones

INSTALLATION INSTRUCTIONS

1. Make sure the marks are located at the desired height.
Note: Make sure to allow height clearance along the
bottom of the mirror for your faucet if necessary.
2. If the wall is drywall, there is no need to drill pilot holes
for wall anchors (AA). Screw anchors (AA) flush into the
wall. Then, insert screws (BB) into anchors (AA), leaving
approximately 1/4 in. protruding out from the wall.
If the wall is not drywall, please choose appropriate
mounting hardware (not included) for your installation site,
and follow the installation instructions to secure the
mounting hardware to the wall.
Hardware Used
AA Anchor
BB Screw
3. With the assistance of another adult, lift mirror (A)
to the wall and hang mounting hangers (B) on screws
(BB).
x 1
x 1
4
1
2
AA
BB
BB
AA
3
A
1/4 in.
BB
B