Tabla de contenido
Publicidad
When you reload with more wood, if there are not enough embers to light the new load of wood, repeat steps 3
and 4.
When the wood burner is in operation, you must not open the door. When putting more wood on the fire, open
the door slowly to prevent the smoke inside the fireplace from blowing out into the room.
3. 4 Adjusting primary and secondary air inlets
You have purchased an insert model that offers maximum efficiency and performance. Therefore, control of the
primary and secondary air inlet is essential to achieve optimum combustion levels.
The optimal regulation of the air inlets can vary depending on various factors, such as the chimney flue, the
temperature of the wood burner, the quality of the wood (moisture, size and shape).
1
2
In order to avoid burns while regulating air flow, use always the regulation lever provided
with the appliance.
3. 5 Adjusting air when lighting a fire
Primary air inlet
-
It is essential to open this inlet to maximum position when lighting the fire and to leave the door ajar to
avoid the condensation of fumes on the glass.
You must wait enough time (until the appliance has warmed up) before adjusting the air inlet.
Secondary air inlet
-
Open fully when lighting a fire.
(1)
SECONDARY air inlet regulation.
(2) PRIMARY air inlet regulation.
19
Publicidad
Tabla de contenido
