Tabla de contenido
Publicidad
− The appliance must be installed on floors with sufficient bearing capacity.
− Do not use flammable liquids for lighting, maintain them far from the chimney
− Combustible materials must not be installed on the appliance or inside the brickwork.
− On days with adverse draught conditions (very low atmospheric pressure, heavy frosts), or when the flue is
very cold, or in chimneys with a poor draught, you can help the draught to start before lighting the fire by
heating the flue:
1. Prepare the wood for lighting inside the wood burner.
2. Place a firelighter or a sheet of newspaper on the deflector at the start of the flue and set fire to it.
3. After a few seconds, when the chimney draught starts, light the wood as instructed.
− Observe the minimum safety distances from nearby combustible materials.
In front of the appliance: minimum 1.6 m.
22
Publicidad
Tabla de contenido
