En - Important Instructions - Kettler 07708-220 Manual De Instrucciones

– EN – Important Instructions
Please read these instructions carefully prior to carrying out assembly and using for the first time. They con-
tain information which is important for your safety as well as for the use and maintenance of the appliance. Keep
these instructions in a safe place for reference purposes, maintenance work and to assist you when ordering
spare parts.
For Your Safety
! RISK!
While assembly of the product keep off
children's reach (Choking hazard - contains small
parts).
! WARNING!
The training device should be used
only for its intended purpose, i.e. for physical exer-
cise by adult people.
■
This device may be used only in combination with
the KETTLER Wall Bars (07708-200).
! WARNING!
This training device is for home use
only.
■
Before beginning your program of exercise, con-
sult your doctor to ensure that you are fit enough to
use the equipment. Base your program of exercise
on the advice given by your doctor. Incorrect or ex-
cessive exercise may damage your health!
■
This exercise machine may only be used for exer-
cises indicated in the training instructions.
! WARNING!
Before beginning your program of
training, study the instructions for training ca-
refully.
■
Use the training device only when wearing appro-
priate sports clothing (without any strings, belts
etc.).
! RISK!
Any other use of the equipment is prohibited
and may be dangerous. The manufacturer cannot
be held liable for damage or injury caused by im-
proper use of the equipment.
RISK!
!
Instruct persons using the equipment (in
particular children) on possible sources of danger
during exercising. Only for appliances with weights
or dumbbells. This especially applies to the area of
movement of weights and dumbbells.
! RISK!
Incorrect repairs and structural modificati-
ons (e.g. removal or replacement of original parts)
may endanger the safety of the user.
! WARNING!
Any interference with parts of the pro-
duct that are not described within the manual may
cause damage, or endanger the person using this
machine. Extensive repairs must only be carried
out by KETTLER service staff or qualified personnel
trained by KETTLER.
■
The training device has been designed in accor-
dance with the latest standards of safety. Any fea-
tures which may have been a possible cause of
injury have been avoided or made as safe as possi-
ble.
■
The training device corresponds with DIN EN ISO
20957-1:2014, class H. It is therefore unsuitable for
therapeutic use.
■
In case of enquiry, please contact your KETTLER
dealer.
4
■
Damaged components may endanger your safety
or reduce the lifetime of the equipment. For this
reason, worn or damaged parts should be repla-
ced immediately and the equipment taken out of
use until this has been done. Use only original
KETTLER spare parts.
■
Before use, always check all screws and plug-in
connections as well as respective safety devices fit
correctly.
■
Our products are subject to a constant innovative
quality assurance. We reserve the right to perform
technical modifications.
■
The location for the device must be selected such
that a sufficient and safe distance from any
obstacles is maintained. In the immediate vicinity
of the main operational directions, nothing else
should be placed. There should be at least one
meter of free space surrounding the exercise
space. Make sure that no one, other than the
person who is training, is in the device space when
the device is in motion.
■
Please observe the maximum admissible load of
120 kg.
■
The product is not suitable for use by persons
weighing over 120 kg.
■
Nobody may be in the moving range of a training
person during training
■
This training device has to be set up on a horizon-
tal surface under all circumstances. Place rubber
or straw mats under it to deaden any noise or im-
pacts. Only for appliances with weights. Avoid po-
werful oscillations of the dumbbells!
■
When mounting the product please take the re-
commended torque information into account (
xx Nm).
■
Before assembling the Training Device, make sure
that the structural load capacity and materials are
adequate for installation of the device. Take into
consideration the type and condition of the walls
and/or masonry, the substructure, etc. If you are
not sure whether the wall can support the weight,
get advice from a structural engineer.
=