A.M.P SP1 Manual Del Usuario página 2

Getting Started
Charging the battery before use is recommended but not required.
The SP1 ships pre-charged however initial charge will vary. Connect
the included Micro-USB cable to your SP1 and a USB slot of any
PC or Mac to charge. The LED will alternate between red and white
while charging and will turn off when fully charged.
Pairing Mode
Push and hold the center button for 6-8 seconds until the LED
constantly flashes white. You are now in Pairing Mode. See your
phone/music device manual for pairing instructions.
Center Button
Volume up
Volume down
EN