Led Indicator - A.M.P SP1 Manual Del Usuario

LED Indicator

LED Color
Flashing Red
Alternating Red and White
Solid White
Flashing White
Connections
You may connect to your device wirelessly via Bluetooth or use a 3.5
mm stereo input cable.
Start Listening
For optimal sound, please make sure that the SP1 is sitting flat on its
base (with the a.m.p. label on the bottom) and facing forward (with the
SP1 label being read right-side up when you look at it).
When connected via Bluetooth, it's best to have the phone volume
turned fully up and use the "+" and "-" buttons that are located on the
top of your SP1.
If you decide to use the 3.5 mm function, please make sure that the
SP1's volume is turned down before operation. This will reduce the
tendency to overdrive the speaker's units causing distortion to the audio.
Socializing
The SP1 can be used as a wireless speakerphone. The built-in
microphone will only function under wireless connectivity via Bluetooth.
Description
Low Battery
Charging
Fully Charged
Pairing Mode
EN