Product Specifications - Hultafors ELWX 60 Instrucciones De Uso

– Using accessories from other manufacturers which have not been expressly approved by the
manufacturer.
– Handling of the device when measuring in the vicinity of machines in operation or open
machine parts or plants.
– Under no circumstance should this device be aimed at any other person.

3. Product specifications

3.1 Construction laser
Laser class: II (2) in accordance with
EN 60825-1 or FDA 1040.10
Laser type: 650 nm or 635 nm, ≤ 1,0 mW
Visibility: approx. 50 m, depending on the lighting
conditions
Levelling accuracy:
+/-0.5 mm/m horizontal vial,
normal position
+/-0.25 mm/m laser beam to the
measuring surface
+/-1.0 mm/m laser beam to the side plate
3.2. Electronic inclination module
Max. measurement tolerance:
In standard position
Horizontal and vertical vial: 0.3 mm/m
In inverted position
horizontal and vertical vial: 0.75 mm/m
360° measuring range.
Measuring accuracy:
0°/90° = 0,05°
1°-89°= 0.2°
Display in degrees°:
Subdivision in 4 x 90° in 0.1° increments
Horizontal = 0° vertical = 90°
Point size:
at 10 m, approx. 6 mm
at 20 m, approx. 10 mm
Working temperature: -15° to +50°
Storage temperature: -20° to +50°
Power supply: 2 x 1.5 V AAA (LR03) for approx.
20 hours operation
Weight: ~ 900 g incl. batteries
Display in percent%:
In 0.1% increments
Horizontal = 0%
The display in percent shows the relationship
between the vertical and the horizontal planes
of the angle.
Power supply: 1 x 9 V PP3 (6LR61)
for approx. 20 operating hours
When measuring upside-down, the display turns
around automatically. (see page 4, fig. a)
13
45° angle =100%