Technical Data - Hughes & Kettner TriAmp Mark 3 Manual

11 Technical Data

General Electrical Data
Power output Up to 150 watts
Max. power consumption 460 watts
Inrush Current 100 V: 27 A , 120 V: 26 A , 220-240V: 23 A
Mains voltage tolerance range +/-10%
Ambient operating temperature 0° to +35° C
range
Mains fuse, 100 volts 250 V / T 5 A
Mains fuse, 120 volts 250 V / T 5 A
Mains fuse, 220-230 volts 250 V / T 2 A
Mains fuse, 240 volts 250 V / T 2 A
Anode fuse T 800 mA
Tube heater fuse TT 15 A (Schurter 7040.3210)
Tubes
No. Art. No. Type
1 9440008 7025/E83CC
(ECC83), High-Grade
2 9440001 12AX7A-C, select.
3 9440007 ECC83, select.
4 9440007 ECC83, select.
5 9440007 ECC83, select.
6 9440007 ECC83, select.
7 9440007 ECC83, select.
8 9440007 ECC83, select.
9 9440007 ECC83, select.
10 6000122 EL34B-STR, select.
11 6000122 EL34B-STR, select.
12 6000120 6L6GC-STR, select.
13 6000120 6L6GC-STR, select.
14 6000120 6L6GC-STR, select.
15 6000120 6L6GC-STR, select.
Power Amp Tubes* / Power Output
2x EL34
2x 6L6
4x 6L6
2x 6L6 + 2x EL34
4x 6L6 + 2x EL34 (recommended)
*as shipped
Origin Function
Slovakia Input Tube
(active on all channels)
China Channel 1B (Preamp)
Slovakia Channel 1A-1B
(Preamp Output)
Slovakia Channel 2A-2B-3A-3B
(Preamp)
Slovakia Channel 2A-2B
(Preamp Output)
Slovakia Channel 3A
(Preamp Output)
Slovakia Channel 3B
(Preamp)
Slovakia FX Buffer
(active on all channels)
Slovakia Power Amp Driver
(active on all channels)
China Power Tubes 1/2
China Power Tubes 1/2
China Power Tubes 3/4
China Power Tubes 3/4
China Power Tubes 5/6
China Power Tubes 5/6
8 ohms / THD=10% 8 ohms / THD=5%
84 watts 34 watts
72 watts 30 watts
126 watts 93 watts
132 watts 95 watts
145 watts 116 watts
Inputs
Input jack 6.3 mm (1/4"), unbalanced
Impedance 1 M ohms
Max. input Level / 1 kHz (Amp 1A) 0 dBV
Input Sensitivity / 1 kHz (EQ Boost off
centered, levels in max. position)
Amp 1A: -33 dBV
Amp 1B: -49 dBV
Amp 2A: -56 dBV
Amp 2B: -74 dBV
Amp 3A: -76 dBV
Amp 3B: -78 dBV
FX-Return jack 6.3 mm (1/4"), unbalanced
Impedance 22 k ohms
Max. Level / 1 kHz +14 dBV
Sensitivity / 1 kHz (Master -10 dB switch
centered, max. FX-Level) deactivated
0 dBV
Power Amp In jack 6.3 mm (1/4"), unbalanced
Impedance 350 k ohms
Sensitivity / 1 kHz (depending on +6 to +10 dBV
the channel)
Outputs
Red Box DI Out XLR, balanced
Impedance 2 k ohms
Output Level 0 dBV (balanced)
Max. Output Level +12 dBV
FX Send jack 6.3 mm (1/4"), unbalanced
(Max. Volume, EQ centered) -10 dB switch
deactivated
Impedance 2.2 k ohms
Max. Level / 1 kHz -2 dBV
Power Amp Out jack 6.3 mm (1/4"), unbalanced
Max. Level / 1 kHz +20 dBV
MIDI
MIDI In 7-pin (5-pin compatible)
20 V DC phantom power (150 mA)
MIDI Out/Thru 5-pin
Mechanical Data
Dimensions (WxHxD) 740 x 393 x 254 mm
Weight 22 kg / 48.5 lbs.
TriAmp Mark 3 – Manual 1.1
Boost on
Amp 1A: -37 dBV
Amp 1B: -49 dBV
Amp 2A: -56 dBV
Amp 2B: -74 dBV
Amp 3A: -76 dBV
Amp 3B: -89 dBV
-10 dB switch activated
-10 dBV
-10 dB switch
activated
680 ohms
+8 dBV
13