Making Pasta - ADE KG 2102 Instrucciones De Operación

Making pasta

5. Set the dial to position 6 and run the pasta dough through the rollers once again.
6. Repeat the process by setting the dial to the next lower position after each run until
the desired thickness of the pasta dough is obtained.
7. Cut the dough sheet into approx. 25 cm long pieces using a sharp knife.
‚ Position 1 produces a very thin dough sheet. Try running the dough
through at another position to check if it is more suitable.
‚ If processing of long pasta seems cumbersome, you can cut the dough
sheets into shorter pieces.
Making pasta
You can use the two attachments to make spaghetti or fettuccine.
22
1. If not yet done, push the cutting
attachment sideways onto the
pasta machine. It must be pushed
on at an angle from above. Note
the notches on the sides of the
cutting attachment and pasta
machine.
2. Put the crank into the respective
roller of the cutting attachment
depending on whether you want
to make spaghetti or fettuccine.
Use the crank to run the dough
sheet through the cutting roller.
KG 2102 manual pasta machine