IVS AVD748BD Manual Del Usuario página 36

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 283
2)
EVENT RECORD
Set the event recording function on / off.
3)
TIMER RECORD
Set the timer recording function on / off.
4)
PRE-ALARM RECORD
Select to enable or disable the pre-alarm function (ON / OFF).
When pre-alarm and event recording functions are both activated, the DVR will record 8MB data before an
alarm / motion event is triggered.
5)
OVERWRITE
Select "ON" to overwrite previous recorded data in your HDD when the HDD is full. When this function is on
and the HDD is full, the DVR will clear 8GB data from the oldest for continuous recording without notice.
6)
EVENT RECORD ALL CH
Select to record all channels (ON) or record the channel with an event only (OFF) for any event.
7)
KEEP DATA LIMITS (DAYS)
Assign the maximum recording days from 01 to 31 after which all the recorded data will be removed, or
select "OFF" to disable this function.
8)
RECORD CONFIG
Click "SETUP" to enter the setting page individually for manual record, event record and timer record.
For details, please refer to "5.1.1 GENERAL" at page 14.
5.5.8 DEVICES
CANERA
CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 CH10 CH11
DETECTION
ALERT
NETWORK
DISPLAY
RECORD
DEVICES
DCCS
IVS
NOTIFY
EXIT
1)
DEVICE
For the PTZ camera, select "PTZ".
For a zoom lens control camera:
The DVR will detect it automatically and display its model number here.
To configure the parameters for a zoom lens control camera, please refer to "5.5.9 DCCS" at page 31. Different zoom lens control
cameras might have different parameter settings. For details, please refer to their own user manuals.
2)
ID
Click the current value to set the ID number (0 ~ 255) for the connected PTZ camera if necessary.
Make sure the ID setting of the camera is the same as the setting here, or the DVR will not be able to control
the device.
Note: To know the default ID of the PTZ camera, please refer to its user manual.
3)
PROTOCOL
Select NORMALE (our protocol), P-D (PELCO-D) or P-P (PELCO-P) protocol.
ADVANCED CONFIG
DEVICE
ID
PROTOCOL
RATE
PTZ
00
NORMALE
2400
30
MAIN MENU

Publicidad

Tabla de contenido
loading

Productos relacionados para IVS AVD748BD

Este manual también es adecuado para:

Avd746bdAvd744bAvd744bdAvd744cAvd744cd

Tabla de contenido