Waterpik waterflosser WP-150 Serie Manual De Instrucciones

QUICK START GUIDE
WP-150 Series
1
Unit Prep
ON
OFF
O
Fill reservoir with warm I
water and replace it
firmly on the base.
2
Water Floss
POWER
ON
O
I
LOW
Turn power and water on.
Start on low pressure and
increase to your liking.
TO AVOID MESS: KEEP TIP IN MOUTH WHILE UNIT IS ON.
This device is compatible with voltages of 120 VAC, 60 Hz.
FILL
Insert tip until it
clicks into place.
ON
OFF
Close lips enough to prevent
splashing, while still allowing
water to flow from mouth
into the sink.
INSERT
ON
OFF
O I
Visit
waterpik.com/welcomeWF
Register your product and
receive over $50 in savings.
waterpik.com/registration
POWER
ON
O
I
HIGH
Turn pressure to high, point
tip into sink, turn power and
water switches ON until water
flows. Turn switches OFF.
Aim water at a 90° angle
to your gumline. Follow the
gumline and pause briefly
between teeth.
©2019 Water Pik, Inc.
ON
OFF