K2 Pumps SWG20001DBK Manual Del Proprietário página 5

DIMENSIONS
IMPORTANT! - Pump Suction MUST be a minimum of 4" from basin floor with use of legs, stand or slide rail system.
RECEIVING & INSTALLATION
Receiving Inspection
Upon receiving the pump, it should be inspected for damage or shortages. If damage has occurred, file a claim
immediately with the company that delivered the pump. If the manual is removed from the packaging, do not lose or
misplace.
Storage
Any product that is stored for a period longer than six (6) months from the
date of purchase should be bench tested prior to installation. A bench test
consists of, checking the impeller to assure it is free turning and a run test
to assure the motor (and switch if provided) operate properly. Do not pump
out of liquid.
Controls
The grinder pump requires a separate approved pump control device or
panel for automatic operation.
Location
The grinder pump is designed to fit in basin or wet well by using a slide rail system (with legs removed) or by resting
on floor of basin with legs attached.
Submergence
The pump should always be operated in the submerged condition. The minimum sump liquid level should never be
less than above the pump's volute (See Figure 1).
For Professional Technical Support call 1-844-242-2475
Figure 1
5