Kit Assembly - Metra 95-3009 Instrucciones De Instalación

ISO DDIN radio provision
1. Attach the radio brackets to the radio
using the screws supplied with the
radio. (Figure A)
2. Locate the factory wiring harness and
connector in the dash and complete
all necessary connections to the radio.
Metra recommends using the proper
mating adapter from Metra. Test the
radio for proper operation.
3. Secure the completed assembly into
the dash. Use the factory screws for the
drivers side radio bracket and (1) #10
x 1/2" Phillips screw provided into the
passenger side of the radio bracket.
4. Reassemble the dash in reverse order of
disassembly, using the radio trim panel
instead of the factory panel.

KIT ASSEMBLY

(Figure A)
3
REV. 1/4/2018 INST95-3009