Remote Control Operation - Home Decorators Collection 94469 Guía De Uso Y Mantenimiento

Operating Your Fan and Remote Control
Learning process
NOTE: After the AC power is on, do not press any other button on
the remote control before pressing the "Power" button (VV). Doing
so will cause the procedure to fail.
NOTE: The remote control can learn multiple receivers. Make sure
no other receivers are operating during the learning process.
Separate the fan power switches by approximately 2 meters.
□
Turn the main power source off to begin the learning process.
□
Return the power to the fan.
□
Within 60 seconds of turning the fan's power ON, press and hold
the "Power" button (VV) on your remote control for 5 seconds.
Once the receiver has detected the set frequency, the down light
of your fan, if applicable, will blink twice. If your fan is currently
on, the fan will stop running. If your fan is currently off, the fan
will move forward at medium speed.

Remote control operation

3 = High speed
2 = Medium speed
1 = Low speed
(VV) = Power button. Press and release the button immediately to
turn on or turn off the ceiling fan.
(WW) = Reverse button. Press and release the button immediately
to set the fan air flow direction up or down.
(XX) = Light/Dimmer button. Press and release the button
immediately to turn on or turn off the light. Press and hold the
button to dim or brighten the light to the desired level and then
release. (For tungsten bulbs only and dim light function, turn the
switch to "DIM").
Attach the wall cradle to the wall to
hold the remote control
□
Position the wall cradle in the desired position and attach it to the
wall using the included wall cradle screws.
15
Please contact 1-800-986-3460 for further assistance.
VV
WW
XX
HOMEDEPOT.COM/HOMEDECORATORS