Program The Remote Transmitter - SportDOG SPORT TRAINER SD-1875E Manual De Funcionamiento

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 80
STEP :: 06

PROGRAM THE REMOTE TRANSMITTER

The SportTrainer® SD-1875E has 12 operational
modes to allow you to select the best match for your
type or style of training. The Remote Transmitter
is factory set to mode 1 and the Toggle Switch
up position. There are also two programming
modes: Mode 7 (Change Tones) and Mode V/T
(Change ID Codes).
TO CHANGE THE MODE
1. Refer to the following tables for descriptions of
all modes.
2. For modes 1 – 6 in the Toggle Switch up position,
select the desired mode on the Intensity Dial.
Or for modes 1 – 6 in the Toggle Switch down position, select the desired mode on the Intensity Dial.
For example, if mode 5 is desired, in either the Toggle Switch up or Toggle Switch down position, set the
Intensity Dial to level 5.
3. Turn the Remote Transmitter over.
4. Using a pen or the tine of a buckle, depress and release the Mode Button. When pressed, the Transmitter
Indicator Light will be solid in colour. When it is released, the Indicator Light will flash the number of times
for the mode selected. For example, mode 5 would flash 5 times.
Note: For two-dog operation setup refer to STEP 9. For three-dog operation setup refer to STEP 10.
WWW.sportdog.com
15

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Sport trainer 1600m

Tabla de contenido