Invacare InTouch ITFG Manual Del Usuario página 5

Removing the inner cover
NOTE: For this procedure, refer to FIGURE 3.
1. Remove the cushion from the outer cover. Refer to Removing the outer cover on page 4.
2. Unflap the inner cover.
3. Remove the cushion from the inner cover.
Installing the inner cover
NOTE: For this procedure, refer to FIGURE 3.
1. Position the cushion with the pelvic support layer toward the rear of the inner cover.
NOTE: The back surface of the cushion is marked "REAR".
2. Slide the cushion into the inner cover.
3. Fold the top flap over and tuck it into the bottom cover.
4. Fold the bottom flap back.
5. Reinstall the cushion, with inner cover in place, into the outer cover. Refer to Installing the outer
cover on page 4.
FIGURE 3 Removing the inner cover - Installing the inner cover
Part No 1141447
Insert - Toward
Rear of Inner
Cover
Inner Cover
Cushion
Top Flap
Bottom Flap
5
InTouch™ Flovair Cushion