Operation And Status Display; Cleaning And Care - NUK Thermo Light Instrucciones De Operación

Operation and status display

The operating LED will illuminate or blink de-
pending on the operating mode:
– It is always on when heating.
– In keep-warm mode, it exhibits a long-short
blinking pattern (3.0 seconds on; 0.5 seconds
off).
– The cool-down process is activated after keep-
warm mode or after previous deactivation.
During this process, it exhibits a short-short
blinking pattern (0.5 seconds on; 0.5 seconds
off).

Cleaning and care

Danger of electrocution!
– Pull the power plug before cleaning.
– Allow the device to cool off completely.
– Make sure that no water penetrates the base
A. Never immerse the base in water. Never
rinse it off under running water. ■
Damage to property!
Do not in any circumstances use solvents. ■
• If the device requires cleaning, e.g. because
baby food has overflowed, you should ideally
clean the device with a damp cloth and a small
amount of detergent. Afterwards, dry it thor-
oughly.
• Scouring agents should only be used for the
glass surfaces as they damage the plastic sur-
faces.
GB-9
Baby food warmer