Kapro Prolaser 894 Visi-Cross Manual Del Usuario página 13

Vertical Line
The laser level can generate a vertical line.
1.
Set up the Cross Laser approximately level on a flat, vibration-free surface
or a tripod. The laser level can compensate for up to ± 4° from the
horizontal plane.
2.
Turn the lock to ON. The power indicator will light up.
Press the V button on the keypad on the top of the unit. The laser level
3.
will generate a vertical line. If it is set up outside the ± 4° limit the laser
beam will flash and an alarm will sound.
To activate Detector (Pulse) mode, press the P button on the keypad.
4.
The Detector mode indicator will light up.
5.
Before moving the laser level, press the V button again and turn the lock
to OFF.
Cross Beam
The vertical and horizontal laser lines can be operated together or
separately.To generate a cross beam, press the H and V buttons one after
the other.
Laser Detector
®
The Prolaser
together with the Laser Detector.
Use the Laser Detector when it is hard to see the light beam, such as
outdoors or in bright rooms.
Attach the Laser Detector to a rod if the laser unit is positioned above head
height.
11
OPERATING INSTRUCTIONS
™
894 Visi-Cross is effective at up to 130ft (40m) when used
1
2
3
4
5
6